eBay
This auction is for  swapped  B20 / VTEC DOHC Motor  in to  1992 to 2000 Civic, Del sol, Integra Using obd1 VTEC ECU P28 P72 P08 P30

FOR 1996 to 2000 civic integra you must use the step down harness and the chipped / Socketed obd1 ecu to use this chip

This is for the  Custom Tuned  MUGEN map for B20 / VTEC engine,  this chip Has the  power and torque throughout the entire 8200 RPM, This is good for drag / Circuit racing. 

Chip modifies the timing / Fuel curve to increase horsepower throughout the power band. Depending on your engine Setup, expect 10-25 horsepower just from this chip



Custom Tuned  Mugen MAP FOR B20 / VTEC Chip Info

VTEC Enable:  4750 RPM                                   IF YOU WANT THE VTEC POINT TO BE HIGHER OR LOWER,  PLEASE DO LET ME KNOW WHEN YOU BUY THE CHIP

REV Limit: 8200 rpm                                           IF YOU WANT THE REV LIMIT TO BE HIGHER OR LOWER,  PLEASE DO LET ME KNOW WHEN YOU BUY THE CHIP 

Idle: 850 rpm

Knock sensor:  DISABLE / or Enable

speed limiter DISABLE

O2 :  DISABLE / or Enable

Shift Light :    ( if you want the shift light.  Must let me know which RPM you want it set at)

BONUS: LAUNCH CONTROL (OPTIONAL ) If you want the launch control please do leave a note, when you buy the Chip

I can also disable, IAVC, , VTEC speed check , Oil pressure switch,

 

IF THE ECU IS NOT SOCKETED THEN PLEASE LOOK IN MY OTHER ITEM FOR SALE AND YOU WILL FIND THE CHIPPING KIT TO MODIFY THE OBD1 ECU,  IF YOU HAVE ANY QUESTION DONT HESITATE TO ASK

ill Email you the picture and Tracking # of the item once it's shipped

USA Shipping through USPS First Class, 3 to 6 Business days (With Tracking #)

International shipping Through USPS First class,  7 to 15  business days (with Tracking #)

Canadian shipping through Canada post,  3 to 6 Business days

I would recommend the ECU modification is done by a professional.  I can't warranty chips damaged by static electricity, or improper installation. 

I also modify ECU, If you would like to send me your ECU for modification, please email me for details.